NEC1 - Revision history

Administrator: 2 Versionen importiert

2025-09-28T12:26:19Z

2 Versionen importiert

← Older revision	Revision as of 13:26, 28 September 2025
(No difference)

imported>The Robman: /* NEC1 */

2016-03-08T20:12:18Z

NEC1

← Older revision		Revision as of 21:12, 8 March 2016
Line 1:		Line 1:
	===[[NEC1]]===		===[[NEC1]]===
	IRP notation: {38.4k,564}<1,-1\|1,-3>(16,-8,D:8,S:8,F:8,~F:8,1,~~-78~~,(16,-4,1,~~-173~~)*)		IRP notation: {38.0k,564}<1,-1\|1,-3>(16,-8,D:8,S:8,F:8,~F:8,1,^108m,(16,-4,1,^108m)*)
	EFC translation: LSB comp		EFC translation: LSB comp
	A few devices use NEC1 protocol at 40Khz, rather than the typical frequency. When getting a decode of NEC1, if you notice that the frequency is closer to 40Khz than to 38Khz, examine multiple learns from the same device to estimate whether the 40Khz frequency is a learning error or a true characteristic of the device. If the 40Khz is correct, there are methods in JP1, or MakeHex (whichever you are using) to reproduce NEC1 at 40Khz rather than the usual frequency.		A few devices use NEC1 protocol at 40Khz, rather than the typical frequency. When getting a decode of NEC1, if you notice that the frequency is closer to 40Khz than to 38Khz, examine multiple learns from the same device to estimate whether the 40Khz frequency is a learning error or a true characteristic of the device. If the 40Khz is correct, there are methods in JP1, or MakeHex (whichever you are using) to reproduce NEC1 at 40Khz rather than the usual frequency.

imported>The Robman: Created page with "===NEC1=== IRP notation: {38.4k,564}<1,-1|1,-3>(16,-8,D:8,S:8,F:8,~F:8,1,-78,(16,-4,1,-173)*) EFC translation: LSB comp A few devices use NEC1 protocol at 40Khz, rather ..."

2014-09-29T03:25:34Z

Created page with "===NEC1=== IRP notation: {38.4k,564}<1,-1|1,-3>(16,-8,D:8,S:8,F:8,~F:8,1,-78,(16,-4,1,-173)*) EFC translation: LSB comp A few devices use NEC1 protocol at 40Khz, rather ..."

New page

===[[NEC1]]===
IRP notation: {38.4k,564}<1,-1|1,-3>(16,-8,D:8,S:8,F:8,~F:8,1,-78,(16,-4,1,-173)*)
EFC translation: LSB comp
A few devices use NEC1 protocol at 40Khz, rather than the typical frequency. When getting a decode of NEC1, if you notice that the frequency is closer to 40Khz than to 38Khz, examine multiple learns from the same device to estimate whether the 40Khz frequency is a learning error or a true characteristic of the device. If the 40Khz is correct, there are methods in JP1, or MakeHex (whichever you are using) to reproduce NEC1 at 40Khz rather than the usual frequency.