973

(973) Channel Lock - Locks channel control to specific device

ChLock Style 1

1. TAP the CBL device button - RELEASE
2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
3. TAP 9 - 7 - 3 -- Two blinks.
4. TAP CH- once to deactivate, or ...
5. TAP CH+, then device key, to activate

NOTE: 4 blinks when deactivates, 2 blinks when activates Deactivated=channel, Enter, Last and numbers can be used by all devices Activated=channel, Enter, Last and numbers always go to selected device (CBL is default active)

ChLock Style 2

The RCA RCRP05B handles the 973 Channel Lock commands differently. It has the capabilty to assign the Channel group (CH+/-, digits, Last) to any device button(s). Note that the instruction sheet provided with the remote is wrong.

To lock all devices to one ChLock device:

1. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
2. TAP 9 - 7 - 3. Two blinks.
3. TAP Ch+
4. TAP the ChLock device button. Two blinks of the selected device.

To unlock Channel Lock for all devices:

1. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
2. TAP 9 - 7 - 3. Two blinks.
3. TAP Ch-. Four blinks.

To assign the ChLock group of one device to a set of devices:

1. TAP the device button of the desired ChLock group
2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
3. TAP 9 - 7 - 3. Two blinks
4. TAP each device button in the set of devices to be reassigned
5. TAP Setup. Two blinks of the ChLock device.