Sending an EFC code direct from remote: Difference between revisions
imported>The Robman Created page with "===Sending an EFC code direct from remote=== Make sure you are in the mode for the device. #TAP and release setup button. #Enter EFC code (3-5 digits long depending on rem..." |
m 1 Version importiert |
(No difference)
| |
Latest revision as of 13:26, 28 September 2025
Sending an EFC code direct from remote
Make sure you are in the mode for the device.
- TAP and release setup button.
- Enter EFC code (3-5 digits long depending on remote)
- make sure remote is pointing to device when you enter last digit.
- Note: The command is sent as long as the last digit is held..