Jump to content

Sending an EFC code direct from remote

From Hifiremote Wiki
Revision as of 18:07, 28 September 2014 by imported>The Robman (Created page with "===Sending an EFC code direct from remote=== Make sure you are in the mode for the device. #TAP and release setup button. #Enter EFC code (3-5 digits long depending on rem...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Sending an EFC code direct from remote

Make sure you are in the mode for the device.

  1. TAP and release setup button.
  2. Enter EFC code (3-5 digits long depending on remote)
  3. make sure remote is pointing to device when you enter last digit.
Note: The command is sent as long as the last digit is held..
Retrieved from "https://wiki.harctoolbox.org/index.php?title=Sending_an_EFC_code_direct_from_remote&oldid=1196"