990

(990) Code Blink Back - Find current device code.

1. TAP the device, (TV, VCR, CABLE, etc.), button - RELEASE
2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
3. TAP 9 - 9 - 0.
4. TAP 1, carefully COUNT the number of blinks. (1st digit)
5. TAP 2, carefully COUNT the number of blinks. (2nd digit)
6. TAP 3, carefully COUNT the number of blinks. (3rd digit)
7. TAP 4, carefully COUNT the number of blinks. (4th digit)
8. TAP 5, carefully COUNT the number of blinks. (5th digit), for remotes with 5 digit codes

If the remote DOES NOT blink it means the number is 0. This is your setup code.